[c-nsp] Cannot initiate tunnel (ASA to PIX )

[Chris Gauthier]

----- Original Message ----- 
From: "JR Colmenares" <sforcejr at yahoo.com> 
To: cisco-nsp at puck.nether.net, "Michael K. Smith - Adhost" <mksmith at adhost.com> 
Sent: Wednesday, October 22, 2008 2:27:57 PM GMT -08:00 US/Canada Pacific 
Subject: Re: [c-nsp] Cannot initiate tunnel (ASA to PIX ) 

Mike, 

Thanks for pointing that out. That was my mistake when posting the question. It is actually correct in the config 

<snip> 
3- Is there any command to clear the crypto map connections, just like "clear xlate" for ACLs? 


Actually the "clear xlate" command clears the NAT translation tables, not ACL's. It sounds like the "clear crypto ipsec sa" command is what you are looking for. 

Chris