[c-nsp] Multiple RTR trackers

[Arie Vayner (avayner)]

Paul,

Did you try attaching the track 2 policy to a static route?

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Friday, October 31, 2008 17:38 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Multiple RTR trackers

Hi there..

I'm trying to get multiple RTR trackers running on a 7206VXR-NPE2G:

track 1 rtr 1 reachability
!
track 2 rtr 2 reachability

ip sla 1
 icmp-echo xxx.xxx.xxx.116
 timeout 3000
ip sla schedule 1 life forever start-time now ip sla 2  icmp-echo
xxx.xxx.xxx.198  timeout 3000 ip sla schedule 2 life forever start-time
now

The first one works great:

Oct 22 07:04:30: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up Oct 26
19:29:33: %TRACKING-5-STATE: 1 rtr 1 reachability Up->Down Oct 26
19:30:34: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up Oct 28
16:54:38: %TRACKING-5-STATE: 1 rtr 1 reachability Up->Down Oct 28
16:55:34: %TRACKING-5-STATE: 1 rtr 1 reachability Down->Up

The second one doesn't work at all.... can't figure out if I'm missing
something obvious ;)


What I'm using this for is to setup static routes based on reachability
...
long story as to why..

ip route xxx.xxx.xxx.0 255.255.255.240 xxx.xxx.xxx.116 track 1

Any clues? 

Thanks,

Paul



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/