[c-nsp] SRB4 (was RE: SRC2?)

[Tomas Daniska]

are you using ES20's? beware of CSCsm61571

--

deejay


> -----Original Message-----
> From: Liviu Pislaru [mailto:liviu.pislaru at gmail.com]
> Sent: 29 August 2008 08:56
> To: Tomas Daniska
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] SRB4 (was RE: SRC2?)
> 
> hi,
> 
> i'm running SRB4 on WS-SUP720-3BXL & WS-F6700-DFC3CXL linecards.
> 
> i was running SRB2, hit some BUGs and had to option:
> 
> 1. upgrade to SRB4
> 2. downgrade to SRA7 (change DFC3CXL linecards)
> 
> i went for option 1. and everything is working fine now except my logs
> are full of these lines:
> 
> Aug 29 09:45:59 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7:
> TestFabricFlowControlStatus{ID=33} is skipped
> 
> Aug 29 09:46:01 EETDST: %DIAG-SP-3-TEST_SKIPPED: Module 7:
> TestFabricFlowControlStatus{ID=33} is skipped
> 
> 
> [...]
> 
>   7    2  Supervisor Engine 720 (Hot)            WS-SUP720-3BXL
> SAL09412THT
>   8    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL
> SAL09368YPZ
> [...]
> 
> 
> 
> i'm not worried (yet) because cisco says:
> 
> =====================================================================
> 
> %DIAG-3-TEST_SKIPPED (x1): [chars]: [chars]{ID=[dec]} is skipped
> 
> Explanation: The specified diagnostic test cannot be run.
> 
> Recommended Action: None. Although the test cannot be run, this
message
> does
> not indicate a  problem.
> 
> =====================================================================
> 
> or
> 
> =====================================================================
> 
> %DIAG-3-TEST_SKIPPED (x0): [chars]: [chars]{ID=[dec]} is skipped
> 
> Explanation: This message indicates that the diagnostic test cannot be
> run.
> 
> Recommended Action: No action is required. The system is working
> properly.
> 
> =====================================================================
> 
> but i had to filter these lines from my logs.
> 
> i'm running BGP (full bgp table), MPLS, OSPF, MULTICAST on this
router.
> so i'm pretty pleased with SRB4 until now.
> 
> --
> liviu.
> 
> On Wed, 2008-08-13 at 14:58 +0200, Tomas Daniska wrote:
> > speaking of the releases... is anyone running SRB4 in production
yet?
> >
> > cheers
> >
> > --
> >
> > deejay
> >
> >
> > > -----Original Message-----
> > > From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> > > bounces at puck.nether.net] On Behalf Of Mark Tinka
> > > Sent: 13 August 2008 14:04
> > > To: cisco-nsp at puck.nether.net
> > > Subject: Re: [c-nsp] SRC2?
> > >
> > > On Tuesday 12 August 2008 23:32:42 Chris Griffin wrote:
> > >
> > > > Anyone know when 12.2(33)SRC2 is supposed to be released,
> > > > specifically for the 7600.  I had heard by the end of
> > > > July, but so far no release.
> > >
> > > Same here... heard it was meant to be mid-July, but nothing
> > > yet.
> > >
> > > Having waited this long, it'll come when it comes, I
> > > guess :-).
> > >
> > > Cheers,
> > >
> > > Mark.
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/