[c-nsp] SUP720-3B / 3rd party CF

[Tim Durack]

And that's what I'm trying to do, but apparently not all Kingston cf is
created equal.

My guess is if you do a "show disk0: all" the Kingston cf will show up as a
Toshiba something or other.

Tim:>

On Wed, Sep 3, 2008 at 9:16 AM, Justin Shore <justin at justinshore.com> wrote:

> Tim Durack wrote:
>
>> This is a mystery to me:
>>
>> I've got a few new VS-S720-10G-3C Sups that work just fine with Kingston
>> 1GB
>> CF. I've also got some old SUP720-3Bs that refuse to recognise anything
>> other than Cisco CF. Tried formatting, upgrading rommon (8.5(2)), dd'ing
>> Cisco flash to Kingston etc. This is under 12.2(33)SXH2 in case it makes a
>> difference.
>>
>> Googling around and checking cisco-nsp archives suggest 3rd party flash
>> should work just fine with the 3B.
>>
>> Anyone else run into this?
>>
>
> I run $10 1GB Kingstons in all our equipment, from ISRs to our
> Sup720-3BXLs.  They work great.  My ISRs all run 12.4T releases and my
> Sup720s currently run SRB.
>
> Justin
>
>