[c-nsp] 6500 WS-SUP32-GE-3B failure

[Aaron Riemer]

Thanks Pete,

Non disruptive tests haven't indicated anything as yet. Will try when we
go down for outage.

Cheers,

Aaron.
-----Original Message-----
From: Peter Rathlev [mailto:peter at rathlev.dk] 
Sent: Thursday, 4 September 2008 3:22 AM
To: Aaron Riemer
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 6500 WS-SUP32-GE-3B failure

On Wed, 2008-09-03 at 17:05 +0800, Aaron Riemer wrote:
> We currently have a WS-SUP32-GE-3B where the SFP ports are not coming
> online. Is there a test that can be run from the switch to detect if
> there is a hardware failure? A sh module indicates that the SUP is
ok..

You could try the "diagnostic start module X test Y" commands. It can do
some non-disruptive tests too.

Regards,
Peter


LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.