[c-nsp] Recommended 2800 ISR

[Jason LeBlanc]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I have two 2811s with a full view on each and partial for ibgp, no issues.

Justin M. Streiner wrote:
> On Thu, 4 Sep 2008, Dan Letkeman wrote:
> 
>> I was wondering if anyone has recommendations for a 2800 series router
>> for a 20-30mbit internet connection.  I would like to run a firewall
>> IOS and, nat and basic ACL's.  Would a 2811 be an appropriate choice?
> 
> If you're not running BGP with full feeds, you *might* be able to get
> away with a 2811, given that you're running IOS firewall and NAT as
> well, but you probably wouldn't have much headroom for growth, or if you
> decide you need additional features in the future (Netflow, QoS, routing
> protocols, etc).
> 
> jms
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFIwVvNw+p9Y9BHZ8kRAtBBAJ9MVa6OsKlL3fRZ73LrSGjqSMIk3QCghJBz
YC6nP2buuoVWQE5H3cUJKjg=
=o7vd
-----END PGP SIGNATURE-----