[c-nsp] 12.40(20T), pppoe woes

[David Freedman]

Ah wonderful ollie, thought I was going mad!

Thanks again

------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net



-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com]
Sent: Mon 9/8/2008 11:43
To: David Freedman; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] 12.40(20T), pppoe woes
 
David Freedman <> wrote on Monday, September 08, 2008 12:21 PM:

> Have just moved to testing 12.4(20)T for the HQF functionality, have
> now hit another stumbling point. 
> 
> Was previously doing multiple pppoe sessions (multiple pppoe client
> feature) using the HWIC-4ESW 
> which mandates that the pppoe-client functionality *must* come from
> SVI, 
> in 12.4(20)T this no longer works:
> 
> router(config)# interface Vlan2
> router(config-if)# pppoe-client dial-pool-number 2
> %PPPoE-Client not supported on vlan interfaces
> 
> Placing the client on the actual interface does not work (either PADI
> does not get transmitted 
> or PADO is not interpreted correctly , either way, timeout occurs)
> 
> Has this feature been removed? can't find any reference in 12.4T
> release notes against feature documentation or caveats nor does
> bugtool come back with anything useful. 

David,

please check CSCsu35584, it will be fixed in the upcoming 12.4(20)T1
rebuild and the above restriction will be removed.. 

	oli