[c-nsp] Moving Sup720 from cat6k to 7600

[Gregoire Huet]

Hello,

I want first to thank all the people who helped. The problem is solved, 
it was indeed a monlib issue.

I can only boot my Sup720s on a CF which was formatted in the right slot
on this blade. That's weird... If i format on disk1: (from a cat6k) then
the 7604 will only boot it from disk1: and not from disk0: !

Thank you very much

Best regards

Greg





Church, Charles a écrit :
> I would think that should support an 7604 chassis.  Any chance the IOS
> is corrupt on the flash?  Or the Monlib isn't right.  Can you put the
> card in a working 6500 and verify the IOS image (MD5) and verify via
> 'show disk0 all' that the monlib stuff is right? 
> 
> Chuck 
> 
> -----Original Message-----
> From: Gregoire Huet [mailto:greg at ip-man.net] 
> Sent: Thursday, September 04, 2008 12:40 PM
> To: Church, Charles
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Moving Sup720 from cat6k to 7600
> 
> 
> Church, Charles wrote :
>> Is it possible you're trying to boot an IOS version that doesn't
> support
>> that chassis?  I'm sure there is a minimum version for a 7604, and I'm
>> sure it's more recent than the minimum for the 6500 it came out of.
> 
> I'm trying to boot c7600s72033-advipservicesk9-mz.122-33.SRC1.bin
> 
> By the way, i have the trace of the booting process :
> 
> rommon 7 > reset
> 
> System Bootstrap, Version 8.5(2)
> Copyright (c) 1994-2007 by cisco Systems, Inc.
> Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
> 
> rommon 1 > boot disk0:
> 
> Initializing ATA monitor library...
> string is disk0:c7600s72033-advipservicesk9-mz.122-33.SRC1.bin
> Loading image, please wait ...
> 
> 
> Initializing ATA monitor library...
> 
> *** Illegal Opcode Exception ***
> PC = 0x80102ae4, Cause = 0x28, Status Reg = 0x30409003
> 
> monitor: command "boot" aborted due to exception
> rommon 2 >
> 
> 
> Thank you
> 
> Greg
> 
>