[c-nsp] PPPOE Static IP

[Drikus Brits]

Your basis of radius attributes will most likely be :

Framed-Protocol    :=  PPP             
Framed-MTU         :=  1500            
Framed-IP-Address  :=  192.168.1.100   
Framed-IP-Netmask  :=  255.255.255.255 
Service-Type       :=  Framed-User
And the required Cisco-AVPair attribute.


and you shouldn't require a second pool on your 7206. The pool would
only serve a function if you were assigning on a per-authentication
basis, were it would take a new ip from the pool for each new
connection.

You can use either a sql db or flatfile for the commands.

Regards,

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rhino Lists
Sent: Monday, September 08, 2008 5:01 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] PPPOE Static IP

I have a cisco 7206 terminating PPPOE DSL connections via Radius.  I
have a
user who wants a static IP.  Do I need to create another ip pool and how
do
I assign the IP in radius?

 

K

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
Please note: This email and its content are subject to the disclaimer as displayed at the following link http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm. Should you not have Web access, send a mail to disclaimers at is.co.za and a copy will be emailed to you.