[c-nsp] Router reloads on it's own

[Rodney Dunn]

What does 'sh region' say?

It's a bus error where the PC and address match.
Either it's bad memory if the PC value is out of valid text space
or it's a stack corruption type issue which is a software bug.

12.2(25)S throttls is end of engineering.

You would need to upgrade to 12.2(33)SRC1.

Rodney


On Wed, Sep 10, 2008 at 04:11:09PM +0200, Rens wrote:
> Can anyone help me with the following? How can I get more info regarding
> this error message?:
> 
>  
> 
> System returned to ROM by bus error at PC 0x60995708, address 0x60995708 at
> 12:09:02 CET Mon Sep 8 2008
> 
> System restarted at 12:10:43 CET Mon Sep 8 2008
> 
> System image file is "disk0:c7200-p-mz.122-25.S11.bin"
> 
>  
> 
> Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of
> memory.
> 
> Processor board ID 23690131
> 
> R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2 Cache
> 
> 6 slot VXR midplane, Version 2.3
> 
>  
> 
> Last reset from watchdog reset
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/