[c-nsp] Using CA certificates and pre-shared keys on the same box

[Luan Nguyen]

You could try to configure 2 ISAKMP profiles:  one use CA, one use
pre-shared.  Then configure 2 IPSEC profiles accordingly.

-Luan


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of nasir.shaikh at bt.com
Sent: Wednesday, September 10, 2008 10:07 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Using CA certificates and pre-shared keys on the same box

Hi,

I have a 2851 working as a hub for remote VPN sites using CA
certificates. I want to add other remotes which are using pre-shared
keys as their authentication method.

Is it possible to configure the hub router to support both the CA
trustpoint and per-shared keys?

 

Kind regards

 

Nasir Shaikh 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/