[c-nsp] Setting the Remote Syslog Port in IOS

Christian Koch christian at broknrobot.com
Wed Sep 10 16:24:34 EDT 2008


checked for any switches after the inputting the ip address on logging
host command but nothing was available


#logging host 1.1.1.1 transport ?
% Unrecognized command


On Wed, Sep 10, 2008 at 3:55 PM, Tassos Chatzithomaoglou
<achatz at forthnet.gr> wrote:
> Have you tried "logging host XXX transport udp port Y"?
>
> --
> Tassos
>
> Christian Koch wrote on 10/09/2008 19:41:
>>
>> I know i can set the remote syslog port on ASA/PIX's, but i don't seem
>> to see that it is possible in IOS.
>>
>> I wanted to segregate logs by sending them from certain devices to
>> separate syslog ports
>>
>> Can anyone confirm this behavior?
>>
>> Has anyone had the need to do something similar?
>>
>> Thanks
>>
>>
>> Christian
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>


More information about the cisco-nsp mailing list