[c-nsp] RES: GSR12008 Error
Leonardo Gama Souza
leonardo.souza at nec.com.br
Wed Sep 10 17:00:27 EDT 2008
You can try to insert that LC into another slot and collect those commands if the issue come back.
________________________________
De: Chris Lane [mailto:clane1875 at gmail.com]
Enviada: qua 10/9/2008 17:44
Para: Leonardo Gama Souza
Cc: cisco-nsp at puck.nether.net
Assunto: Re: [c-nsp] GSR12008 Error
Darn, problem for me is i removed the 8 port FastE card that was causing all the grief last night because it kept reloading. I removed the one connection i had in LC and LC still continued to bounce.
Here is the output anyways.
-----------------------------------------
On Wed, Sep 10, 2008 at 4:33 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
The same command.
execute-on all show controller fia
Rgds.
________________________________
De: Chris Lane [mailto:clane1875 at gmail.com]
Enviada: qua 10/9/2008 17:34
Para: Leonardo Gama Souza
Assunto: Re: [c-nsp] GSR12008 Error
You didn't add command ~
Thanks
On Wed, Sep 10, 2008 at 4:23 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
Oh. I forgot one thing.
You must issue this command on all LC as well.
________________________________
De: Chris Lane [mailto:clane1875 at gmail.com]
Enviada: qua 10/9/2008 17:25
Para: Leonardo Gama Souza
Cc: cisco-nsp at puck.nether.net
Assunto: Re: [c-nsp] GSR12008 Error
No errors as you can see.
cr.la1.ca#sh <http://cr.la1.ca/#sh> controller fia
Fabric configuration: 2.4Gbps bandwidth, redundant fabric
Master Scheduler: Slot 17 Backup Scheduler: Slot 16
From Fabric FIA Errors
-----------------------
redund fifo parity 0 redund overflow 0 cell drops 0
crc32 lkup parity 0 cell parity 0 crc32 0
Switch cards present 0x001F Slots 16 17 18 19 20
Switch cards monitored 0x001F Slots 16 17 18 19 20
Slot: 16 17 18 19 20
Name: csc0 csc1 sfc0 sfc1 sfc2
-------- -------- -------- -------- --------
los 0 0 0 0 0
state Off Off Off Off Off
crc16 0 0 0 0 0
To Fabric FIA Errors
-----------------------
sca not pres 0 req error 0 uni fifo overflow 0
grant parity 0 multi req 0 uni fifo undrflow 0
cntrl parity 0 uni req 0 crc32 lkup parity 0
multi fifo 0 empty dst req 0 handshake error 0
On Wed, Sep 10, 2008 at 4:10 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
Hi,
Look for errors in "show controller fia".
Maybe the LC was badly seated...
Maybe you have a bad SFC...
There are a lot of possibilities.
Cheers,
Leonardo Gama.
________________________________
De: cisco-nsp-bounces at puck.nether.net em nome de Chris Lane
Enviada: qua 10/9/2008 15:58
Para: cisco-nsp at puck.nether.net
Assunto: [c-nsp] GSR12008 Error
All,
GSR question, appears Cisco finally got around to updating the IOS train on
12.0.32.S - we have been running S8 for a while but S11 just came out and it
appears to have many new features! One of my routers is running 12.0.32.S6 -
its been so for 2years. I had a bad 8 port FastE lc a while back so I
replaced just recently with a known good lc tested in the lab, So I sent it
to replace the failed one ~ after 2 days I started getting these errors.
%FABRIC-3-ERR_HANDLE:
%RP-3-FABRIC_UNI
%FIA-3-HALT
L%LC-6-BMACMDRPLY
>From what I gather this is the RP is having trouble communicating with the
LC. One of these errors suggests upgrading IOS ~ but S6 to S8 isn't that
big of a deal and couldn't possibly be the culprit could it? Is this RP
related? And if so I could easily flip to the backup RP.
Any suggestions would be super appreciative.
--
//CL
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
--
//CL
--
//CL
--
//CL
More information about the cisco-nsp
mailing list