[c-nsp] RES: GSR12008 Error

[Leonardo Gama Souza]

Most likely so. Could be occurred an ESD.
But on other hand the LC might have been bad seated....or there is a problem with that specific slot...
 
Cheers,
Leonardo.

________________________________

De: Chris Lane [mailto:clane1875 at gmail.com]
Enviada: qua 10/9/2008 18:12
Para: Leonardo Gama Souza
Cc: cisco-nsp at puck.nether.net
Assunto: Re: [c-nsp] GSR12008 Error


I think its safe to say its the LC. Issue is resolved with LC removed.  
Site is remote across country, i will get a maintenance window and get more info in the near future.

Regards,

Chris


On Wed, Sep 10, 2008 at 5:00 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:


	You can try to insert that LC into another slot and collect those commands if the issue come back.
	 

________________________________

	
	De: Chris Lane [mailto:clane1875 at gmail.com]
	
	Enviada: qua 10/9/2008 17:44 

	Para: Leonardo Gama Souza
	Cc: cisco-nsp at puck.nether.net
	Assunto: Re: [c-nsp] GSR12008 Error
	

	Darn, problem for me is i removed the 8 port FastE card that was causing all the grief last night because it kept reloading. I removed the one connection i had in LC and LC still continued to bounce. 
	Here is the output anyways.

	-----------------------------------------



	On Wed, Sep 10, 2008 at 4:33 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
	

		The same command.
		execute-on all show controller fia
		 
		Rgds.

________________________________

		
		De: Chris Lane [mailto:clane1875 at gmail.com]
		
		Enviada: qua 10/9/2008 17:34
		Para: Leonardo Gama Souza 

		Assunto: Re: [c-nsp] GSR12008 Error
		

		You didn't add command ~ 

		Thanks
		
		
		On Wed, Sep 10, 2008 at 4:23 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
		

			Oh. I forgot one thing.
			You must issue this command on all LC as well.
			 

________________________________

			De: Chris Lane [mailto:clane1875 at gmail.com]
			Enviada: qua 10/9/2008 17:25
			Para: Leonardo Gama Souza
			Cc: cisco-nsp at puck.nether.net
			Assunto: Re: [c-nsp] GSR12008 Error
			
			
			No errors as you can see.  
			cr.la1.ca#sh <http://cr.la1.ca/#sh>  controller fia
			Fabric configuration: 2.4Gbps bandwidth, redundant fabric
			Master Scheduler: Slot 17     Backup Scheduler: Slot 16

			From Fabric FIA Errors
			-----------------------
			redund fifo parity 0          redund overflow 0          cell drops 0         
			crc32 lkup parity  0          cell parity     0          crc32      0         
			Switch cards present    0x001F    Slots  16 17 18 19 20 
			Switch cards monitored  0x001F    Slots  16 17 18 19 20 
			Slot:     16         17         18         19         20
			Name:    csc0       csc1       sfc0       sfc1       sfc2
			       --------   --------   --------   --------   --------
			los    0          0          0          0          0          
			state  Off        Off        Off        Off        Off       
			crc16  0          0          0          0          0          
			 
			To Fabric FIA Errors
			-----------------------
			sca not pres 0          req error     0          uni fifo overflow 0         
			grant parity 0          multi req     0          uni fifo undrflow 0         
			cntrl parity 0          uni req       0          crc32 lkup parity 0         
			multi fifo   0          empty dst req 0          handshake error   0
			On Wed, Sep 10, 2008 at 4:10 PM, Leonardo Gama Souza <leonardo.souza at nec.com.br> wrote:
			

				Hi,
				 
				Look for errors in "show controller fia".
				Maybe the LC was badly seated...
				Maybe you have a bad SFC...
				There are a lot of possibilities.
				 
				Cheers,
				Leonardo Gama.

________________________________

				De: cisco-nsp-bounces at puck.nether.net em nome de Chris Lane
				Enviada: qua 10/9/2008 15:58
				Para: cisco-nsp at puck.nether.net
				Assunto: [c-nsp] GSR12008 Error
				
				

				
				All,
				
				GSR question, appears Cisco finally got around to updating the IOS train on
				12.0.32.S - we have been running S8 for a while but S11 just came out and it
				appears to have many new features! One of my routers is running 12.0.32.S6 -
				its been so for 2years. I had a bad 8 port FastE lc a while back so I
				replaced just recently with a known good lc tested in the lab,  So I sent it
				to  replace the failed one ~ after 2 days I started getting these errors.
				
				%FABRIC-3-ERR_HANDLE:
				
				%RP-3-FABRIC_UNI
				
				%FIA-3-HALT
				
				L%LC-6-BMACMDRPLY
				
				
				
				>From what I gather this is the RP is having trouble communicating with the
				LC.  One of these errors suggests upgrading IOS ~ but S6 to S8 isn't that
				big of a deal and couldn't possibly be the culprit could it? Is this RP
				related? And if so I could easily flip to the backup RP.
				
				Any suggestions would be super appreciative.
				
				--
				//CL
				
				_______________________________________________
				cisco-nsp mailing list  cisco-nsp at puck.nether.net
				https://puck.nether.net/mailman/listinfo/cisco-nsp
				archive at http://puck.nether.net/pipermail/cisco-nsp/
				

				

				

				

				

				

				

				




			-- 
			//CL
			




		-- 
		//CL
		




	-- 
	//CL
	




-- 
//CL