[c-nsp] site to site and remote access on pix 506e

[dalton]

Hi,

I'm wondering if anyone has a working config for a pix 506e running 6.3 or
so, to do both site to site
and remote access vpn. I assume this is possible?

I have a pix running a few site to sites, however when i added the remote
access config, it caused
the tunnels to fail leaving them in a state of Xauth config or something
of the like (don't have the exact error).

Things fail when I add these 2 lines to the crypto map

crypto map toCLIENT client configuration address initiate
crypto map toCLIENT  client authentication LOCAL


config is below, thanks.

-dalton

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
hostname client-pix
domain-name client.logicworks.net
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
no fixup protocol sip 5060
no fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list toCLIENT permit ip host 10.10.1.49 host 205.200.125.1
access-list toCLIENT permit ip host 10.10.1.49 host 205.200.125.2
access-list toCLIENT permit ip host 10.10.1.60 host 205.200.125.1
access-list toCLIENT permit ip host 10.10.1.60 host 205.200.125.2
access-list toCLIENT permit ip host 10.10.1.51 host 205.200.125.1
access-list toCLIENT permit ip host 10.10.1.51 host 205.200.125.2
access-list DENY-NAT permit ip 10.10.1.0 255.255.255.0 10.177.187.0
255.255.255.0
access-list DENY-NAT permit ip host 10.10.1.49 host 205.200.125.1
access-list DENY-NAT permit ip host 10.10.1.49 host 205.200.125.2
access-list DENY-NAT permit ip host 10.10.1.60 host 205.200.125.1
access-list DENY-NAT permit ip host 10.10.1.60 host 205.200.125.2
access-list DENY-NAT permit ip host 10.10.1.51 host 205.200.125.1
access-list DENY-NAT permit ip host 10.10.1.51 host 205.200.125.2
access-list DENY-NAT permit ip 10.10.1.0 255.255.255.0 10.254.10.0
255.255.255.0
access-list splittunnelACL permit ip 10.10.1.0 255.255.255.0 10.254.10.0
255.255.255.0
pager lines 24
logging on
logging timestamp
logging standby
logging console alerts
logging monitor alerts
logging buffered debugging
logging history alerts
mtu outside 1500
mtu inside 1500
ip audit info action alarm
ip audit attack action alarm
ip local pool REMOTEPOOL 10.254.10.10-10.254.10.20 mask 255.255.255.0
pdm history enable
arp timeout 14400
nat (inside) 0 access-list DENY-NAT
conduit permit ip any any
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set strong esp-3des esp-sha-hmac
crypto ipsec transform-set mytrans esp-aes esp-sha-hmac
crypto dynamic-map dynmap 10 set transform-set mytrans
crypto map toCLIENT 20 ipsec-isakmp
crypto map toCLIENT 20 match address toCLIENT
crypto map toCLIENT 20 set peer x.x.x.x
crypto map toCLIENT 20 set transform-set strong
crypto map toCLIENT 999 ipsec-isakmp dynamic dynmap
crypto map toCLIENT client configuration address initiate
crypto map toCLIENT  client authentication LOCAL
crypto map toCLIENT interface outside
isakmp enable outside
isakmp key ******** address x.x.x.x netmask 255.255.255.255
isakmp identity address
isakmp policy 8 authentication pre-share
isakmp policy 8 encryption 3des
isakmp policy 8 hash sha
isakmp policy 8 group 2
isakmp policy 8 lifetime 86400
vpngroup client address-pool REMOTEPOOL
vpngroup client dns-server x.x.x.x
vpngroup client default-domain client.logicworks.net
vpngroup client split-tunnel splittunnelACL
vpngroup client split-dns logicworks.net
vpngroup client idle-time 3600
vpngroup client password ********
vpngroup idle-time idle-time 1800