[c-nsp] ME3750 Shaping

[Syed Waqqas Ahmed]

just another example we are using on ME 3400 series switches.

policy-map BE-test-in
 class rate-limit
    police cir 1024000 bc 16000
      conform-action set-cos-transmit 0
      exceed-action drop
!

Regards,

Waqqas Ahmed

On Tue, Sep 16, 2008 at 9:09 AM, Syed Waqqas Ahmed <waqqasahmed at gmail.com>wrote:

>  just an example i found rate-limiting the traffic use policy map.
>
> policy-map BE-6mbps
>   class RATELIMIT
>    police cir 6144000 bc 128000 be 128000    conform-action
> set-dscp-transmit default    exceed-action drop     violate-action drop
>
> interface GigabitEthernet13/47
>  service-policy input BE-6mbps
>  service-policy output BE-6mbps
>
> you can prioritize  cetrian traffic using dscp bit value..
>
>
> Regards
>
> Waqqas Ahmed.
>   On Tue, Sep 16, 2008 at 6:30 AM, Brad Henshaw <brad.henshaw at qcn.com.au>wrote:
>
>> Eric Van Tol wrote:
>>
>> > The idea here is very simple - there are ports that receive
>> > a data-only service and a ports that receive both data and voice.
>>
>> What do you /really/ need to achieve here? Priority for voice? Rate
>> limitation of voice, data or both to a certain rate?
>>
>> Also how do you identify data vs. voice? VLAN? DSCP/CoS?
>>
>> Regards,
>> Brad
>>  _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>