[c-nsp] Cisco 12406 Etherchannel

[Mark Tech]

Hi
I am trying to configure Ethernchannel/link bundling on a 12406. The port channel seems to be accepted, however when I try and add a channel-group to my GE interfaces, it says its not supported? I am using SPA-10X1GE-V2 line cards with c12kprp-p-mz.120-32.SY6.bin IOS


interface Port-channel1
 ip address x.x.x.x 255.255.255.252
 no ip directed-broadcast
 channel-group minimum active 1
 no channel-group bandwidth control-propagation

router(config-if)#channel-group 1
Error: not supported on GigabitEthernet0/0/0.

Is there a way to bundle more that 1GE port on a 12406?

Regards

 Mark