[c-nsp] boot sytem issue

[Fredrik Jacobsson]

You might need to specify both boot-files on the same row. I think
they should be separated by a semicolon, just do a "?" to verify.

boot system flash flash:/first-option;flash:/second-option

Regards
/Fredrik

2008/9/17, Alex Wa <awain567 at yahoo.com>:
> helo guys,
>
> We ran into a problem with a 3570 switch. we are trying to update IOS, keeping the current as second option , it accepts both boot system commands but doesn't update running-config and overwrites the existing entry in bootvar. here is the command output ...
>
>
> Router(config)#boot system flash:c3750-ipbasek9-mz.122-44.SE2.bin
> Router(config)#
> Router#sh boot
> BOOT path-list      : flash:c3750-ipbasek9-mz.122-44.SE2.bin
> Config file         : flash:/config.text
> Private Config file : flash:/private-config.text
> Enable Break        : no
> Manual Boot         : no
> HELPER path-list    :
> Auto upgrade        : yes
>
> Router(config)#boot system flash:c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin
> Router#sh boot
> BOOT path-list      : flash:c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin
> Config file         : flash:/config.text
> Private Config file : flash:/private-config.text
> Enable Break        : no
> Manual Boot         : no
> HELPER path-list    :
> Auto upgrade        : yes
>
> any hint or suggestion?
>
> thanks in advance
> Alejandro wainshtok
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>