[c-nsp] Cisco 12406 Etherchannel

[Mark Tech]

Hi
After rechecking I have upgraded to c12kprp-p-mz.120-33.S1
Now Link Bundling is working 

Regards

Mark




----- Original Message ----
From: David Freedman <david.freedman at uk.clara.net>
To: cisco-nsp at puck.nether.net
Sent: Wednesday, September 17, 2008 5:06:21 PM
Subject: Re: [c-nsp] Cisco 12406 Etherchannel

Yes, I've been waiting for link-agg on these SPA modules for AGES

I don't even have any dates for when it will be available, its a major pain

Use ECMP if you can...

Dave,.


Mark Tech wrote:
> Hi
> I am trying to configure Ethernchannel/link bundling on a 12406. The port channel seems to be accepted, however when I try and add a channel-group to my GE interfaces, it says its not supported? I am using SPA-10X1GE-V2 line cards with c12kprp-p-mz.120-32.SY6.bin IOS
> 
> 
> interface Port-channel1
>  ip address x.x.x..x 255.255.255.252
>  no ip directed-broadcast
>  channel-group minimum active 1
>  no channel-group bandwidth control-propagation
> 
> router(config-if)#channel-group 1
> Error: not supported on GigabitEthernet0/0/0.
> 
> Is there a way to bundle more that 1GE port on a 12406?
> 
> Regards
> 
>  Mark
> 
> 
> 
>      
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/