[c-nsp] Cisco ZX and HP LH

[Tim Durack]

Should work - they are both 1550 optics. You might need some attenuators on
either side. HP says:

"Maximum distance:

   - 10-70,000 m (singlemode fiber)

*Notes*
For distances less than 20km, a 10dB attenuator must be used.
For distances between 20km and 40km, a 5dB attenuator must be used.
Attenuators can be purchased from most cable vendors."

Tim:>

On Fri, Sep 19, 2008 at 4:24 PM, Fields, Jesse <Jesse.Fields at wesd.org>wrote:

> Hello, we have a customer with limited funds that has about an eleven mile
> fiber run with a Cisco 3750 at one end and a HP 2510-48 at the other.  They
> would like us to try Cisco ZX fiber module to a HP LH (HP's version of ZX)
> fiber module.  I know SX - SX works but would like to know if anyone has
> successfully gone ZX to LH?
>
> Thank you.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>