[c-nsp] VPLS and cisco

[Christopher Hunt]

I'm not aware of the 7206 supporting VPLS (point-to-mulitpoint).  They 
do supprt EoMPLS, which is a point-to-point design.

-- 
Christopher Hunt



------------------------------

Message: 5
Date: Sat, 20 Sep 2008 08:39:48 +0500
From: Farhan Ali Khan <farhan at cyber.net.pk>
Subject: Re: [c-nsp] VPLS and cisco
To: "'MKS'" <rekordmeister at gmail.com>, cisco-nsp at puck.nether.net
Message-ID: <0K7H00GBY3EZ2G40 at smtp.cyber.net.pk>
Content-Type: text/plain; charset=US-ASCII


7206 and above


Regards
Farhan Ali Khan

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of MKS
Sent: 20 September, 2008 1:56 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] VPLS and cisco

Which cisco boxes do VPLS "out of the box" ?

I know about the 7600 uplink line card issues. What about 7200 / 7300
/ ASR / GSR etc.

Is there any combo of hw / sw that runs VPLS sufficiently stable for
an SP and without the mirard of bugs (unlike SRB1/2 for 7600)

regards
MKS
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/