[c-nsp] High CPU - 7206 with NPE-G1

[Varaillon Jean Christophe]

Hi,

Doing a "show proc cpu | e 0.00" would give you a list of sorted processes using a lot of CPU.

Also, the output of show proc cpu has the format a/y showing the CPU usage for traffic proccessing (interrupt) and protocols handling. This will tell you if your CPU is high due to high traffic.

HTH
Christophe

Please consider your environmental responsibility before printing this e-mail 


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ved Labs
Sent: Thursday, September 25, 2008 2:43 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] High CPU - 7206 with NPE-G1

Searching through the Fourm for High CPU - 7206 with NPE-G1 .

But did not found any conclusions .

Anyone who has any concrete inputs .
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
 

__________ Information from ESET Smart Security, version of virus signature database 3470 (20080925) __________

The message was checked by ESET Smart Security.

http://www.eset.com
 
 

__________ Information from ESET Smart Security, version of virus signature database 3470 (20080925) __________

The message was checked by ESET Smart Security.

http://www.eset.com