[c-nsp] Weird Port Loopback Issues with 3750 and ESX 3.5

[Smales, Robert]

Hi Guys

> -----Original Message-----
>> 
> I have messed with the various duplex / speed settings at 
> both ends and this
> doesn't seem to resolve the issue. I have turned off inline 
> power and mdix
> auto. The cable is CAT5E UTP. Several cables have been tested 
> and the length
> is no longer than 10m. I have connected this NIC to a 3550 
> series switch and
> the exact same thing happens. 

Have you tried it with cat 6 cable?

http://en.wikipedia.org/wiki/Category_6_cable

Robert

Robert Smales                                                
IP Provide Engineer
Cable&Wireless Europe, Asia & US
www.cw.com                              

This e-mail has been scanned for viruses by the Cable & Wireless e-mail security system - powered by MessageLabs. For more information on a proactive managed e-mail security service, visit http://www.cw.com/uk/emailprotection/ 

The information contained in this e-mail is confidential and may also be subject to legal privilege. It is intended only for the recipient(s) named above. If you are not named above as a recipient, you must not read, copy, disclose, forward or otherwise use the information contained in this email. If you have received this e-mail in error, please notify the sender (whose contact details are above) immediately by reply e-mail and delete the message and any attachments without retaining any copies.
 
Cable and Wireless plc 
Registered in England and Wales.Company Number 238525 
Registered office: 3rd Floor, 26 Red Lion Square, London WC1R 4HQ