[c-nsp] Stranger multilink traffic statitics

Everton Diniz notrevebr at gmail.com
Fri Sep 26 13:23:36 EDT 2008


Hi all,

I have a stranger behavior seeing no multilink statitic.
the bundle has 2 serial, on each serial show me about for example 410k
of traffic and on multilink i see about 475k of traffic. On the
multilink should show about 800k, isn´t?
Follow the output.
28rt01#sh int mu210 | i put rate
  30 second input rate 475000 bits/sec, 138 packets/sec
  30 second output rate 341000 bits/sec, 137 packets/sec
28rt01#sh int s0/3/0 | i put rate
  30 second input rate 411000 bits/sec, 63 packets/sec
  30 second output rate 161000 bits/sec, 65 packets/sec
28rt01#sh int s0/3/1 | i put rate
  30 second input rate 411000 bits/sec, 63 packets/sec
  30 second output rate 160000 bits/sec, 62 packets/sec

Multilink210, bundle name is MULTILINK_7
  Endpoint discriminator is MULTILINK_7
  Bundle up for 1d16h, total bandwidth 4096, load 32/255
  Receive buffer limit 24000 bytes, frag timeout 1000 ms
    0/0 fragments/bytes in reassembly list
    1 lost fragments, 1527117 reordered
    0/0 discarded fragments/bytes, 0 lost received
    0x26BCD6 received sequence, 0x13BE51 sent sequence
  Member links: 2 active, 0 inactive (max not set, min not set)
    Se0/3/1, since 1d16h, 2560 weight, 1496 frag size
    Se0/3/0, since 1d16h, 2560 weight, 1496 frag size
No inactive multilink interfaces

Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version
12.4(3f), RELEASE SOFTWARE (fc3)

interface Multilink210
 ip access-group internet-inbound in
 ip access-group internet-outbound out
 ip nbar protocol-discovery
 rate-limit input access-group 101 128000 8192 16384 conform-action
transmit exceed-action drop
 ip route-cache flow
 load-interval 30
 no cdp enable
 ppp multilink
 ppp multilink fragment delay 10
 ppp multilink interleave
 ppp multilink group 210
 max-reserved-bandwidth 100
 service-policy output internet-outbound-qos-enforcement
end
interface Serial0/3/0
 bandwidth 2048
 no ip address
 ip route-cache flow
 load-interval 30
 ppp multilink
 ppp multilink group 210
 max-reserved-bandwidth 100
end
interface Serial0/3/1
 bandwidth 2048
 no ip address
 encapsulation ppp
 ip route-cache flow
 load-interval 30
 ppp multilink
 ppp multilink group 210
 max-reserved-bandwidth 100
end


More information about the cisco-nsp mailing list