[c-nsp] WS-X6724-SFP & SXI = high cpu usage?

[Tassos Chatzithomaoglou]

...small correction : a DFC must be present

--
Tassos

Tassos Chatzithomaoglou wrote on 02/04/2009 08:13:
> Anyone running SXI with a WS-X6724-SFP module (DFC or non DFC), showing 
> high cpu usage due to the fw_lcp process?
> 
> 
> 6500#remote command module 1 sh proc cpu sort | exc 0.00
> 
> CPU utilization for five seconds: 32%/1%; one minute: 31%; five minutes: 
> 31%
>  PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
>  187     1949496    613964       3175 31.19% 30.47% 30.45%   0 fw_lcp 
> process
> 
> 
> 6500#sh platform hardware capacity cpu
> CPU Resources
>   CPU utilization: Module             5 seconds       1 minute       5 
> minutes
>                    1                  28% /  0%            
> 28%             28%
>                    6  RP               1% /  1%             
> 1%              1%
>                    6  SP              18% /  0%            
> 15%             14%
> 6500#sh mod
> Mod Ports Card Type                              Model              
> Serial No.
> --- ----- -------------------------------------- ------------------ 
> -----------
>   1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       
> XXXXXXXXXXX
>   6    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       
> XXXXXXXXXXX
> 
> 
> SXH, SXF do not seem to have this problem.
>