[c-nsp] client mac address on LNS??
Asad Ul-Islam
asad747 at cyber.net.pk
Mon Apr 6 01:05:40 EDT 2009
Dear Friends!
I have a setup in which DSL users connect to a LNS via L2TP. Everything is
working fine, however on LNS I am not receiving any MAC address for the DSL
Users( Type PPPoVPDN). This is my standard crucial requirement for
generating several reports for management purposes.
Can someone tell me if it is possible to get Mac-address for the VPDN
users??? I am getting mac-address for PPPoE type users which are terminated
on my BRAS.
Attach is the debug output for both LNS and BRAS which shows that
mac-address field is missing in LNS output.
######### LNS output (domain stripping is used) ##########
Apr 6 04:29:47.020: RADIUS(00001037): Send Access-Request to
10.10.10.10:3312 id 1645/44, len 123
Apr 6 04:29:47.020: RADIUS: Framed-Protocol [7] 6 PPP
[1]
Apr 6 04:29:47.020: RADIUS: User-Name [1] 11 "testuser7"
Apr 6 04:29:47.020: RADIUS: User-Password [2] 18 *
Apr 6 04:29:47.020: RADIUS: NAS-Port [5] 6 370
Apr 6 04:29:47.020: RADIUS: NAS-Port-Id [87] 17
"Uniq-Sess-ID370"
Apr 6 04:29:47.020: RADIUS: Connect-Info [77] 9 "1920000"
Apr 6 04:29:47.020: RADIUS: NAS-Port-Type [61] 6 Virtual
[5]
Apr 6 04:29:47.020: RADIUS: Service-Type [6] 6 Framed
[2]
Apr 6 04:29:47.020: RADIUS: NAS-IP-Address [4] 6 1.1.1.1
Apr 6 04:29:47.020: RADIUS: Acct-Session-Id [44] 18
"CAA36E5A00001058"
Apr 6 04:29:47.308: RADIUS: Received from id 1645/44 10.10.10.10:3312,
Access-Accept, len 37
Apr 6 04:29:47.308: RADIUS: Class [25] 5
Apr 6 04:29:47.308: RADIUS: 50 49 4E
[PIN]
Apr 6 04:29:47.308: RADIUS: Service-Type [6] 6 Framed
[2]
Apr 6 04:29:47.308: RADIUS: Framed-Protocol [7] 6 PPP
[1]
Apr 6 04:31:47.100: RADIUS(00001038): Received from id 1645/45
Apr 6 04:31:47.100: VT[Vi3.1]:Request took 0 msec, 0 msec processing time
Apr 6 04:31:47.100: uid:371 Tnl/Sn 58894/504 L2TP: Virtual interface
created for testuser7 at best-dsl bandwidth 1920 Kbps
Apr 6 04:31:47.100: Vi3.1 Tnl/Sn 58894/504 L2TP: Virtual interface created
for testuser7 at best-dsl, bandwidth 1920 Kbps
Apr 6 04:31:47.100: Vi3.1 Tnl/Sn 58894/504 L2TP: VPDN session up
Apr 6 04:31:47.220: RADIUS/ENCODE(00001038):Orig. component type = VPDN
Cisco-3845-L2TP-LNS#show users
Interface User Mode Idle Peer Address
Vi3.1 testuser7 at best-ds PPPoVPDN - 1.1.1.233
######### BRAS output ##########
*Mar 1 00:13:15.367: RADIUS(00000009): Send Access-Request to
10.10.10.10:3312 id 1645/6, len 167
*Mar 1 00:13:15.367: RADIUS: Vendor, Cisco [26] 41
*Mar 1 00:13:15.367: RADIUS: Cisco AVpair [1] 35
"client-mac-address=000f.a392.4bef"
*Mar 1 00:13:15.367: RADIUS: Framed-Protocol [7] 6 PPP
[1]
*Mar 1 00:13:15.367: RADIUS: User-Name [1] 11 "testuser6"
*Mar 1 00:13:15.367: RADIUS: User-Password [2] 18 *
*Mar 1 00:13:15.367: RADIUS: NAS-Port-Type [61] 6 Virtual
[5]
*Mar 1 00:13:15.367: RADIUS: Vendor, Cisco [26] 18
*Mar 1 00:13:15.367: RADIUS: cisco-nas-port [2] 12 "3/0/0/0.36"
*Mar 1 00:13:15.367: RADIUS: NAS-Port [5] 6 805306404
*Mar 1 00:13:15.367: RADIUS: Service-Type [6] 6 Framed
[2]
*Mar 1 00:13:15.371: RADIUS: NAS-IP-Address [4] 6 1.1.1.1
*Mar 1 00:13:15.371: RADIUS: Acct-Session-Id [44] 29
"3/0/0/0.36_CAA3693A0000000E"
*Mar 1 00:13:15.519: RADIUS: Received from id 1645/6 10.10.10.10:3312,
Access-Accept, len 37
*Mar 1 00:13:15.519: RADIUS: Class [25] 5
*Mar 1 00:13:15.519: RADIUS: 50 49 4E
[PIN]
*Mar 1 00:13:15.519: RADIUS: Service-Type [6] 6 Framed
[2]
*Mar 1 00:13:15.519: RADIUS: Framed-Protocol [7] 6 PPP
[1]
*Mar 1 00:13:15.523: RADIUS(00000009): Received from id 1645/6
*Mar 1 00:13:15.643: RADIUS/ENCODE(00000009):Orig. component type = PPoE
Cisc-3640-BRAS-And-L2TP-LAC# show user
Interface User Mode Idle Peer Address
Vi2.1 testuser6 PPPoE 00:03:25 2.2.2.244
Best Regards,
Asad Ul-Islam
More information about the cisco-nsp
mailing list