[c-nsp] Supervisor Failover - Speed question

[David Prall]

Do all linecards also have DFC's? Do you have nsf/graceful-restart
configured for all routing protocols? What linecards are you using?

David

--
http://dcp.dcptech.com
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Wednesday, April 08, 2009 7:45 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Supervisor Failover - Speed question
> 
> Hi there.
> 
> 
> 
> We have 7606's with dual Sup720-3BXL.  I'm investigating how to get the
> fastest possible failover if/when a supervisor fails.
> 
> 
> 
> Current config looks like this:
> 
> 
> 
>        my state = 13 -ACTIVE
> 
>      peer state = 8  -STANDBY HOT
> 
>            Mode = Duplex
> 
>            Unit = Primary
> 
>         Unit ID = 5
> 
> 
> 
> Redundancy Mode (Operational) = sso
> 
> Redundancy Mode (Configured)  = sso
> 
> Redundancy State              = sso
> 
>      Maintenance Mode = Disabled
> 
>  Communications = Up
> 
> 
> 
>    client count = 78
> 
>  client_notification_TMR = 30000 milliseconds
> 
>           keep_alive TMR = 9000 milliseconds
> 
>         keep_alive count = 0
> 
>     keep_alive threshold = 18
> 
>            RF debug mask = 0x0
> 
> 
> 
> --
> 
> 
> 
> redundancy
> 
>  keepalive-enable
> 
>  mode sso
> 
>  main-cpu
> 
>   auto-sync running-config
> 
> 
> 
> 
> 
> 
> 
> Is there any way to get a failover to less than 30 seconds an example?
> We
> find currently it's 2-3 minutes for failover it seems..
> 
> 
> 
> Thanks,
> 
> 
> 
> Paul
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/