[c-nsp] GSR OC3 Eng0 to Eng3
Pete Templin
petelists at templin.org
Tue Apr 14 14:01:55 EDT 2009
Lamar Owen wrote:
> What sort of failures prompted the card switch?
Ugh. Card #1 went offline following an IOS upgrade reboot. Syslog
messages suggested memory problems. After being swapped out, a reseat
of the memory brought the card back to life as a hot spare.
Card #2 began misbehaving with its one and only live link during the
last NANOG. 'hw-mod slot X shutdown' and a removal of that brought the
card back to life, but only for a few days. Card #1 and #2 were swapped.
Then Card #1 began a few instances of random blackholing. After a
reboot, it went offline again. Reseating memory didn't bring it back to
life this time, so a memory swap with Card #2 was necessary.
Both are in the dumpster now. Some other Engine 0 cards are soon to be
freed up; I'm unfortunately tempted to roll back to one of those.
pt
More information about the cisco-nsp
mailing list