[c-nsp] 3550 as a internet distribution switch

[Michael K. Smith - Adhost]

Hello Paul:

Hi,
Is this possible?

I want to configure a 3550 as follows,

1 port as a default gateway,  this will be connected to a internet
router.
e.g.  a WAN connection

Any number of other the other ports to be assigned an IP address that
can be
connected to a cable NAT Router and all outbound traffic be sent to the
default gateway of the 3350

<snip>
[Michael K. Smith - Adhost] 

It doesn't appear that NAT is supported on the 3550, so you would have
to use valid IP's on all of your Layer 3 connections for this to work.

See:

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configura
tion_guide_chapter09186a00801cdf37.html

Regards,

Mike