[c-nsp] Dual WAN on Cisco IOS 12.4(24)T

[Steven.Glogger at swisscom.com]

did you tried to use vlans? 
afaik those 870series router allows up to 5 vlans to be configured.

fa4 can be (ip-)addressed directly, afaik. 

-steven 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of John Lange
Sent: Wednesday, April 15, 2009 4:10 PM
To: Cisco NSP
Subject: [c-nsp] Dual WAN on Cisco IOS 12.4(24)T

I'm looking for some configuration examples for a Cisco 871w in a dual-wan environment. Physically the box only has one of the ports labelled for a WAN port but is it possible to configure one of the other ports as another external interface? Internally they all just show up as FastEthernet ports 0-4.

One port would be DSL with PPPOE and the other would be simple DHCP (cable modem).

Version:
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(24)T

Regards,
--
John Lange
http://www.johnlange.ca

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/