[c-nsp] VTY Lines

[Eric Van Tol]

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Dracul
> Sent: Thursday, April 16, 2009 12:19 AM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] VTY Lines
> 
> If you are running a critical network without the convenience of
> rebooting,
> Jim's Router# cle ip tcp tcb 58F2E668 worked for me
> 
> but take note some IOS use the Router#clear tcp tcb  (without the 'ip')
> 
> regards,
> chris

If you can't gain access to the CLI, it is possible to reset vty TCP sessions using SNMP, assuming you have a read-write string configured on the device.  I personally don't know the procedure, but there are tools out there such as the Solarwinds Engineers Edition toolset that let you do this.  If anyone knows the right procedure, maybe they can post it here.

-evt