[c-nsp] C6kSup720 "LAN ONLY" vs. "WAN"

[Tassos Chatzithomaoglou]

According to Software Advisor you need the wan image for OSM cards (like you said).
Interestingly enough, SIPs/SPAs do not seem to need it. Nevertheless, it's hard to believe 
that OSMs are responsible for the additional 33% of -compressed- code!

-- 
Tassos

John Jensen wrote on 19/04/2009 10:05:
> I checked Cisco's feature navigator and couldn't find any differences
> in supported features between the images, so maybe the differences are
> only in hardware support.
> 
> -JJ
> 
> On Thu, Apr 16, 2009 at 12:05 PM, Peter Rathlev <peter at rathlev.dk> wrote:
>> Hi,
>>
>> Could anybody explain to me where I can find some official documentation
>> about the differences between a "LAN ONLY" and a WAN image for the
>> Sup720? E.g. the difference between these two images:
>>
>> s72033-advipservicesk9-mz.122-33.SXI1.bin
>> s72033-advipservicesk9_wan-mz.122-33.SXI1.bin
>>
>> The former is a meagre 59MB where the latter takes up 90MB. I've assumed
>> that certain WAN modules like OSM cannot run in the "LAN ONLY" image,
>> but I'd love to know where I could know exactly what can and cannot run
>> in the "LAN ONLY" image.
>>
>> Thank you.
>> Peter
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>