[c-nsp] X2 to GigE

[Skeeve Stevens]

Actually, what are the chance of these working in a HP?

Btw... the switch I am looking at is the HP ProCurve Switch 6410cl

I know this is a Cisco list, but I am wanting to put this into a Cisco network and need to uplink it into 3560G's

--
Skeeve Stevens, CEO/Technical Director
eintellego Pty Ltd - The Networking Specialists
skeeve at eintellego.net / www.eintellego.net
Phone: 1300 753 383, Fax: (+612) 8572 9954
Cell +61 (0)414 753 383 / skype://skeeve
--
NOC, NOC, who's there?

Disclaimer: Limits of Liability and Disclaimer: This message is for the named person's use only. It may contain sensitive and private proprietary or legally privileged information. You must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message if you are not the intended recipient. eintellego Pty Ltd and each legal entity in the Tefilah Pty Ltd group of companies reserve the right to monitor all e-mail communications through its networks.  Any views expressed in this message are those of the individual sender, except where the message states otherwise and the sender is authorised to state them to be the views of any such entity. Any reference to costs, fee quotations, contractual transactions and variations to contract terms is subject to separate confirmation in writing signed by an authorised representative of eintellego. Whilst all efforts are made to safeguard inbound and outbound e-mails, we cannot guarantee that attachments are virus-free or compatible with your systems and do not accept any liability in respect of viruses or computer problems experienced.

From: Phil Pierotti [mailto:phil.pierotti at gmail.com]
Sent: Monday, 20 April 2009 4:38 PM
To: Lincoln Dale
Cc: Skeeve Stevens; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] X2 to GigE

I'm guessing that Skeeve is looking for the HP equivalent of this delightful module from Cisco:

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7077/product_data_sheet0900aecd805bbee3.html

Phil P
On Mon, Apr 20, 2009 at 4:29 PM, Lincoln Dale <ltd at cisco.com<mailto:ltd at cisco.com>> wrote:
Skeeve Stevens wrote:
Hey All,

I am looking at using a HP 10GbE switch with X2 slots.... but only X2 - no GigE.

I want to uplink this into a Cisco switch - SFP slot.

Since Cisco uses X2 as well, I am wondering if there is any X2 devices that I can put into the HP that can cross connect into a SFP GigE slot on a Cisco.

Steve,

you'd not understanding layer 1 here.

* GBIC, X2, SFP, Xenpak, SFP+, XFP are transceiver types.
* LC/SC are cable connector types for optics
* MM (FDDI grade, OM1, OM2, OM3), SM are fiber types.

SFP is generally used for gigabit (1G), X2 is generally used for 10G.
from a cabling perspective if this is all local within a single site then generally it would be MM fiber, if its new, suggest you go with OM3.
can't remember connector type on X2, think its SC like a GBIC?  if so, then a LC/SC patch will connect the two.

but you'd probably need a 10G interface to connect it in, which implies something on the Cisco end that is SFP+, X2, SFP, Xenpak.  i.e. NOT SFP.


cheers,

lincoln.



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/