[c-nsp] c7201 error SFP is missing [0]

[Belal Farouk]

I tried to install 12.4(X)T on this chassis to support PA-MC-2T3-EC. "Show fac status" gives me the following: 

Router#sh facility-alarm sta 
System Totals Critical: 1 Major: 0 Minor: 0 

Source Severity Description [Index] 
------ -------- ------------------- 
SFP Slot 0/3 CRITICAL SFP is missing [0] 

Cisco version SFP is in and interface is UP and UP. 

Router#sh int g0/3 
GigabitEthernet0/3 is up, line protocol is up 
Hardware is i82546, address is 0024.97a6.ee17 (bia 0024.97a6.ee17) 
Internet address is 11.0.2.1/24 
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, 
reliability 255/255, txload 1/255, rxload 1/255 
Encapsulation ARPA, loopback not set 
Keepalive set (10 sec) 
Full-duplex, 1000Mb/s, link type is autonegotiation, media type is LX 
output flow-control is XON, input flow-control is XON 

Research on bug didn't find any. There is one reported as chipset i82546 on g0/3 was missing many IOS command to retrieve information CSCsq58662. The other ports are regular NPE-G2 chipset. 

Any one come about this problem and what was the resolution from Cisco. 

Thanks,