[c-nsp] WS-C2950G-24-EI memory upgrade

[Łukasz Bromirski]

On 2009-04-26 17:17, Paul Stewart wrote:

> We have several WS-C2950G-24-EI switches (AC and DC versions)
> running.. Most of them are running 12.1(13)EA1 code and we'd like to
> upgrade into 12.1(22)EA13 with crypto.
> These switches have 8 meg flash and 8 meg DRAM today - upgrade in
> software requires 8 meg flash and 16 meg DRAM.  Has anyone done a
> memory upgrade on these?  Is it just a matter of cracking the case
> and putting a DIMM module in?

The fixed line of Catalyst switches doesn't support upgrading memory -
both RAM and flash. When you look at the motherboard - everything is
fixed to it, no slots to change/upgrade anything.

The IOS you're trying to download to the 2950G should boot just fine,
as all 2950 were shipped with maxed out memory config, and there was
no IOS needing any kind of upgrade (as it was not field doable).

-- 
"Don't expect me to cry for all the     |               Łukasz Bromirski
  reasons you had to die" -- Kurt Cobain |    http://lukasz.bromirski.net