[c-nsp] 3750 and show mls qos interface <int> stat output

[Peter Rathlev]

On Tue, 2009-04-28 at 13:28 -0600, Clinton Work wrote:
> Anybody have a more detailed description of the field headers for the 
> "show mls qos interface <int> stat" output on a 3750?  Table 2-30 
> describes 6 field headers, but the command output only has 5 fields of 
> output.   Are they the same as the 3550:  incoming, no_change, 
> classified, policed, and dropped?  

The command output has all 6 fields mentioned in Table 2-30 (DSCP
incoming, DSCP outgoing, CoS incoming, CoS outgoing, Policer inprofile,
Policer outofprofile) when I run it:

AAR-R2-1-ASW-01#sh mls qos interface g1/0/1 stat
Load for five secs: 6%/0%; one minute: 5%; five minutes: 5%
Time source is NTP, 22:23:09.677 CEST Tue Apr 28 2009

GigabitEthernet1/0/1

  dscp: incoming
-------------------------------

  0 -  4 :  4214116912            0            0            0            0  
...
 60 - 64 :           0            0            0            0  
  dscp: outgoing
-------------------------------

  0 -  4 :   737640602            3            9            0            4  
...
 60 - 64 :           0            0            0            0  
  cos: incoming
-------------------------------

  0 -  4 :    52897690            0            0   4161830576            0  
  5 -  7 :           0            0            0  
  cos: outgoing
-------------------------------

  0 -  4 :   738646401            0            0    350381249            0  
  5 -  7 :           0      6512607            0  
Policer: Inprofile:            0 OutofProfile:            0 

AAR-R2-1-ASW-01#

Beware that the two policer statistics are in one line.

Regards,
Peter