[c-nsp] ASA / EIGRP / Redundant Interfaces

[Tony Varriale]

It's really hard to say without knowing some details about your network but 
if you want 1 path active at once you can always use the max-paths command 
set to 1.

tv
----- Original Message ----- 
From: "Jason Link" <Jason.Link at whgroup.com>
To: "Cisco-nsp" <cisco-nsp at puck.nether.net>
Sent: Wednesday, April 29, 2009 2:57 PM
Subject: [c-nsp] ASA / EIGRP / Redundant Interfaces


> Hello all,
>
>
>
> With an ASA running a redundant physical interface pair for the Inside
> interface, each link connected to a separate switch which is connected
> to a separate router, and everything running EIGRP, I get multiple
> routes (2) to the same destination subnet, one for each of the connected
> routers.  This is obviously causing problems, and I can't seem to find a
> way to resolve it.  Setting delay on the physical interfaces doesn't
> seem to take effect, and there is no variance sub-command so I can't
> just force one route.  This needs to function in a redundant situation,
> as in if I lose a router or switch everything will continue to function
> (hence the redundant interface).  I tried google and cisco and found
> nothing of any significance...anyone got any ideas?
>
>
>
> Thanks!
>
>
>
>
>
>
>
> Jason Link
>
> Network Engineer
>
> Wisconsin Hospitality Group / RSC
>
> Office 414-259-8484
>
> Cell 414-403-3110
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/