[c-nsp] TE-DB issue

[Amjad Ul Hasnain Qasmi]

Hello,

 

I have enabled traffic engineering support in my domain. My setup is like.

 

(Cisco)------Gig-------(Juniper1)-------FE-------(Juniper2). When I see the
entries at Cisco in the TE-DB that were built from LSAs sent by Juniper2, it
shows me igp metric as "IGP metric:invalid". I am unable to find any
reference material on this issue any help will be highly appreciated.

 

----------------------------------------------------------------------------
--------------------------------

IGP Id: 192.168.96.251, MPLS TE Id:192.168.96.251 Router Node  (ospf 10
area 0) id 53

      link[0]: Broadcast, DR: 192.168.85.249, nbr_node_id:124, gen:22637

          frag_id 4, Intf Address:192.168.85.250, Nbr Intf Address:0.0.0.0

          TE metric:10, IGP metric:invalid, attribute flags:0x0

          SRLGs: None 

          physical_bw: 1000000 (kbps), max_reservable_bw_global: 1000000
(kbps)

          max_reservable_bw_sub: 0 (kbps)

 

                                 Global Pool       Sub Pool

               Total Allocated   Reservable        Reservable

               BW (kbps)         BW (kbps)         BW (kbps)

               ---------------   -----------       ----------

        bw[0]:            0          1000000                0

        bw[1]:            0          1000000                0

        bw[2]:            0          1000000                0

        bw[3]:            0          1000000                0

        bw[4]:            0          1000000                0

        bw[5]:            0          1000000                0

        bw[6]:            0          1000000                0

        bw[7]:            0          1000000                0

----------------------------------------------------------------------------
--------------------------------

 

Regards,

AHQ