[c-nsp] Can't pick up ip address--cisco 1200 ap

[Graham Wooden]

Hi there,

Your switch port that the AP is connected to - is it in trunk mode?
Like "switchport trunk encap dot1q" ?


On 8/1/09 4:52 PM, "snort bsd" <snortbsd at yahoo.com.au> wrote:

> 
> Hi: all:
> 
> I got ciscoAP 1200 configured and can connect it via wireless without
> problems. But the system connecting to the AP can't pick up any IP address.
> 
> dot11 ssid lab vlan 20
>    vlan 20
>    max-associations 10
>    authentication open
>    authentication key-management wpa
>    guest-mode
>    mbssid guest-mode
>    wpa-psk ascii 7 "whatever key"
>    information-element ssidl wps
> !
> dot11 ssid test vlan 10
>    vlan 10
>    max-associations 10
>    authentication open
>    authentication key-management wpa
>    mbssid guest-mode
>    wpa-psk ascii 7 "whatever key"
>    information-element ssidl wps
> 
> what else I didn't do right?
> 
> Thanks
> 
> 
>       
> ______________________________________________________________________________
> ______
> Access Yahoo!7 Mail on your mobile. Anytime. Anywhere.
> Show me how: http://au.mobile.yahoo.com/mail
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/