[c-nsp] Single LNS, two providers

Manaf Al Oqlah manafo at hotmail.com
Thu Aug 6 08:33:16 EDT 2009


why you don't configure another vpdn-group with another virtual-template 
interface? it should  be working very well!

--------------------------------------------------
From: "Ed Lazerus" <edlazerus20 at gmail.com>
Sent: Thursday, August 06, 2009 2:50 PM
To: <cisco-nsp at puck.nether.net>
Subject: [c-nsp] Single LNS, two providers

> Hi,
>
> We have an LNS (7200) configured for DSL from one provider, we wish to 
> keep
> this provider, however they only offer us DSL1, but we are negotiating 
> with
> another wholesaler to supply us with ADSL2+ (only) .
>
> My question is how easy is it to have this single LNS server to service 
> all
> customers using two wholesalers
>
> Is it  a mater of duplicating the following?
>
> vpdn-group cca1
> accept-dialin
>  protocol l2tp
>  virtual-template 1
> source-ip 10.255.255.2
> lcp renegotiation on-mismatch
> l2tp tunnel password  XXXXXXX
> ip mtu adjust
> !
> interface Virtual-Template1
> ip unnumbered Loopback0
> ip tcp adjust-mss 1360
> peer default ip address pool default
> ppp mtu adaptive
> ppp authentication pap chap
>
>
>
> /Ed/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


More information about the cisco-nsp mailing list