[c-nsp] Etherchannel between 2x2960 and 1x7600

[Brian Raaen]

Are the 2960's in a stack, and you are trying to terminate an
etherchannel for the stack?  I'd have to double check but, I believe
that I have this set up on a 7200 that is termination PPPoE.

luismi wrote:
> Hi all,
>
> I would like to know if it is possible to create an etherchannel between
> just 1 router 7600 and 2 switches 2960 connected between them by a
> trunk.
>
> The schema would be....
>
> 2960-------\
> |           \
> Trunk       FEC----7600
> |           / 
> 2960-------/
>
> Is it possible?
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>