[c-nsp] Etherchannel between 2x2960 and 1x7600

[Ryan West]

2960's will not support stacking and yes, they do support clustering, but pretty much every low end switch supports that.  To achieve this type of channeling, you would need 2970's or 3750's with stackwise and then I think you're limited to LACP and regular etherchannel only.

-ryan

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of luismi
Sent: Tuesday, August 11, 2009 8:01 AM
To: Brian Raaen
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Etherchannel between 2x2960 and 1x7600

2960 doesn't support stack as far as I know.
it could support cluster, I think.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/