[c-nsp] vpn configure

[Deric Kwok]

Thank you

Do you know what is cli to configure remote subnet and local subnet for vpn?




On Tue, Aug 11, 2009 at 9:28 PM, Ryan West <rwest at zyedge.com> wrote:

> You can configure the PIX for local and remote subnets using your
> interesting traffic ACL.
>
> Access-list vpn_myacl permit ip <local address> <mask> <remote address>
> <mask>
>
> The PIX can be configured from the outside using PDM:
> http <outside address> <mask> outside
>
> hth
>
> -ryan
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:
> cisco-nsp-bounces at puck.nether.net] On Behalf Of Deric Kwok
> Sent: Tuesday, August 11, 2009 9:10 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] vpn configure
>
> Hi
>
> How can I configure remote subnet and local subnet for vpn in cli?
>
> ls pix only accessed by https in inside for configuration?
>
> No other way for http configuration outside?
>
> Thank you
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>