[c-nsp] ASDM not working after upgrades

[Church, Charles]

Can you HTTPS to the device using a normal browser and get the initial
screen?  

Chuck


----- Original Message ----- 
From: "Leslie Meade" <lmeade at signal.ca>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, August 11, 2009 2:30 PM
Subject: [c-nsp] ASDM not working after upgrades


>I am getting the error of
> Unable to launch device manager from 10.1.254.254
>
> I have uploaded the correct files and change the config to match
>
> ASA5540-01# sh run asdm
> asdm image disk0:/asdm-621.bin
> asdm location 10.1.6.25 255.255.255.255 inside
> asdm history enable
>
> ASA5540-01# sh run http
> http server enable
> http 10.1.6.0 255.255.255.0 inside
>
> ASA5540-01# sh flash
> --#--  --length--  -----date/time------  path
>  131  11348300    Aug 11 2009 10:09:00  asdm-621.bin
>  132  16275456    Aug 11 2009 10:10:10  asa821-k8.bin
>
> If I roll back to the older code and asdm it works fine. Any ideas
>
>
> Leslie
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/