[c-nsp] DS3 circuit error

Matlock, Kenneth L MatlockK at exempla.org
Wed Aug 12 16:08:24 EDT 2009


"  Receiver is getting AIS."


Looks like you have an open in the circuit. Your device is reporting an
AIS (All ones, usually indicative of an open circuit).


Ken Matlock
Network Analyst
Exempla Healthcare
(303) 467-4671
matlockk at exempla.org



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Oddiraju, Kiran
@ London SMC
Sent: Wednesday, August 12, 2009 1:58 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] DS3 circuit error

Hi Guys,

 

Our T3 controller is down and the SP has asked me what I am seeing on my
end. Below is the show controllers command on my router. Could you tell
me where the problem is based on the output below? 

 

Router#sh controllers t3

T3 3/0 is down.

  Applique type is Subrate T3

  Description: Carrier_Circuit_ID  

  Transmitter is sending remote alarm.

  Receiver is getting AIS.

  MDL transmission is disabled

 

  FEAC code received: No code is being received

  Framing is C-BIT Parity, Line Code is B3ZS, Clock Source is Line

  Data in current interval (250 seconds elapsed):

     0 Line Code Violations, 0 P-bit Coding Violation

     0 C-bit Coding Violation, 0 P-bit Err Secs

     0 P-bit Severely Err Secs, 0 Severely Err Framing Secs

     250 Unavailable Secs, 0 Line Errored Secs

     0 C-bit Errored Secs, 0 C-bit Severely Errored Secs

 

Cheers,

K

 

 

 

 

 

 

 


CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales
No. 3536032. 
Regulated by the RICS and an appointed representative of CB Richard
Ellis 
Indirect Investment Services Limited which is authorised and regulated
by the Financial Services Authority.

This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information

which is confidential and may be privileged. If you are not the intended
recipient, 
please contact the sender immediately. Any use of its contents is
strictly prohibited 
and you must not copy, send or disclose it, or rely on its contents in
any way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from
computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its
associated/subsidiary 
companies and the recipient should carry out any appropriate virus
checks.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list