[c-nsp] OT:SUSHI REGISTER RESET ERROR

[e ninja]

Jack,

What changed prior to the errors? Also, is this a lab or production device?

Either way, reply all (or unicast) the complete sh tech and sh log along
with a sh controller fia from an attach session to all LCs.

-Eninja


On Tue, Aug 11, 2009 at 10:54 PM, jack daniels <jckdaniels12 at gmail.com>wrote:

> Hi all,
>
> I'm getting below error in gsr chassis 12416 , please suggest
>
> 048724: .Aug 11 20:09:13.853 IST: %MBUS-6-SWITCHED_FABCLK: Slot 9 primary
> clock switched to clock 0
> 048725: .Aug 11 20:09:17.191 IST: %FABRIC-3-ERR_HANDLE: Reconfigure all
> fabric cards due to SUSHI REGISTER RESET ERROR error from slot 18
> 048726: .Aug 11 20:09:18.067 IST: %MBUS-6-SWITCHED_FABCLK: Slot 0 primary
> clock switched to clock 0
> 048727: .Aug 11 20:09:18.067 IST: %MBUS-6-SWITCHED_FABCLK: Slot 9 primary
> clock switched to clock 0
> 048728: .Aug 11 20:09:21.413 IST: %FABRIC-3-ERR_HANDLE: Reconfigure all
> fabric cards due to SUSHI REGISTER RESET ERROR error from slot 18
> 048729: .Aug 11 20:09:22.289 IST: %MBUS-6-SWITCHED_FABCLK: Slot 0 primary
> clock switched to clock 0
> 048730: .Aug 11 20:09:22.289 IST: %MBUS-6-SWITCHED_FABCLK: Slot 9 primary
> clock switched to clock 0
> 048731: .Aug 11 20:09:25.627 IST: %FABRIC-3-ERR_HANDLE: Reconfigure all
> fabric cards due to SUSHI REGISTER RESET ERROR error from slot 18
> 048732: .Aug 11 20:09:26.502 IST: %MBUS-6-SWITCHED_FABCLK: Slot 0 primary
> clock switched to clock 0
> 048733: .Aug 11 20:09:26.502 IST: %MBUS-6-SWITCHED_FABCLK: Slot 9 primary
> clock switched to clock 0
> 048734: .Aug 11 20:09:29.841 IST: %FABRIC-3-ERR_HANDLE: Reconfigure all
> fabric cards due to SUSHI REGISTER RESET ERROR error from slot 18
> 048735: .Aug 11 20:09:30.716 IST: %MBUS-6-SWITCHED_FABCLK: Slot 0 primary
> clock switched to clock 0
> 048736: .Aug 11 20:09:30.716 IST: %MBUS-6-SWITCHED_FABCLK: Slot 9 primary
> clock switched to clock 0
> 048737: .Aug 11 20:09:34.054 IST: %FABRIC-3-ERR_HANDLE: Reconfigure all
> fabric cards due to SUSHI REGISTER RESET ERROR error from slot 18
>
>
> sh gsr
> Slot 0  type  = Modular SPA Interface Card
>        state = IOS RUN   Line Card Enabled
>        subslot 0/0: SPA-1X10GE-L-V2 (0x50C), status is ok
>        subslot 0/1: Empty
>        subslot 0/2: Empty
>        subslot 0/3: Empty
> Slot 6  type  = Modular SPA Interface Card
>        state = RTRYWAIT  Waiting to retry download after persistent
> failures
> Slot 7  type  = Performance Route Processor
>        state = ACTV RP   IOS Running  ACTIVE
> Slot 8  type  = Performance Route Processor
>        state = RP RDY    Route Processor Powered
> Slot 9  type  = Modular SPA Interface Card
>        state = IOS RUN   Line Card Enabled
>        subslot 9/0: Empty
>        subslot 9/1: Empty
>        subslot 9/2: Empty
>        subslot 9/3: Empty
> Slot 15 type  = Modular SPA Interface Card
>        state = RTRYWAIT  Waiting to retry download after persistent
> failures
> Slot 16 type  = Clock Scheduler Card OC192 Dual Priority
>        state = Card Powered
> Slot 17 type  = Clock Scheduler Card OC192 Dual Priority
>        state = Card Powered  PRIMARY CLOCK
> Slot 18 type  = Switch Fabric Card 16XOC192
>        state = Card Powered
> Slot 19 type  = Switch Fabric Card 16XOC192
>        state = Card Powered
> Slot 20 type  = Switch Fabric Card 16XOC192
>        state = Card Powered
> Slot 24 type  = Alarm Module(16)
>        state = Card Powered
> Slot 25 type  = Alarm Module(16)
>        state = Card Powered
> Slot 27 type  = Bus Board(16)
>        state = Card Powered
> Slot 28 type  = Blower Module(16)
>        state = Card Powered
> Slot 29 type  = Blower Module(16)
>
>        state = Card Powered
>
>
> sh led
> SLOT 0  : RUN IOS
> SLOT 6  : WAITRTRY
> SLOT 7  :  RP ACTV
> SLOT 8  : INITMEM
> SLOT 9  : RUN IOS
> SLOT 15 : WAITRTRY
>
> Regards
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>