[c-nsp] Multiple power supply failures. Advise needed

[Michael Ulitskiy]

Thanks for the advise. This is a good one. Will definitely do.

Michael

On Sunday 16 August 2009 03:15:44 pm Seth Mattinen wrote:
> Michael Ulitskiy wrote:
> > Thanks everybody who replied.
> > I was promised our circuits to be examined by electrician on Monday.
> > Is there a way for me to check the grounding? I remember some fat wires are fastened to the cage,
> > but honestly I didn't pay particular attention.
> > Thanks,
> > 
> 
> You can do it ghetto style by taking a meter and checking for ground
> potentials between different pieces of metal. If all grounds are at the
> same potential the meter will read zero. Run away if you read voltage
> between two metal pieces.
> 
> ~Seth
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>