[c-nsp] IP SLA / EEM Scripting

[Aaron Riemer]

Hey Guys,
 
I am hoping to use a combination of IP SLA and EEM to run a script when
a certain event occurs. For example we have a cellular router that
sometimes requires a reset. We have a backup link so I would like to
automate this reset process. What I would like to do is to monitor the
cellular device with IP SLA icmp probes and after a certain number of
failures run a script that can telnet to the device via the back door
and issue commands to reset.
 
I have done some digging but I am unable to see if EEM supports the
ability for a router to actually telnet to another device and issue
commands. I may have to use our network monitoring app to run the
script. Could Cacti do this?
 
Thanks for any suggestions.
 
Aaron.

LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.