[c-nsp] RPS 675 question

[Ryan West]

Press what button?

Sent from handheld.

On Aug 27, 2009, at 7:23 AM, "Mateusz Blaszczyk" <blahu77 at gmail.com>  
wrote:

> On Wed, Aug 26, 2009 at 12:59:02AM -0700, Seth Mattinen wrote:
>> Justin Shore wrote:
>>> andrew2 at one.net wrote:
>>>> I'm getting ready to install some RPS 675's in order to dual cord  
>>>> some
>>>> 3750's and ran across this in the manual:
>>>>
>>
>> Don't forget rebooting to go back to internal power. Except on 2088
>> series routers with an AC-IP power supply; they can switch back fine.
>>
>
> On the newest IOS (50SE) and 3560-G, all I had to do to switch back to
> internal PSU was to press the button. No reload, no reboot, no  
> downtime.
>
> Best Regards,
>
> -mat
>
> -- 
> Mateusz Blaszczyk
>
> pgp-key 0x64643FCE
> <signature.asc>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/