[c-nsp] Migrate 6500 to 7600

[Rob Shakir]

On Sun, Aug 30, 2009 at 05:25:25PM +0100, Mateusz Blaszczyk wrote:
> On Sat, Aug 29, 2009 at 07:50:22PM +0100, Mateusz Blaszczyk wrote:
> > > With SXF this has never been a
> > > problem, only with SRB/SXH and newer.
> > 
> > Yes, I forgot about the SXF can be run on both platforms. Then one thing
> > less to worry about.
> > 
> not so happy anymore.
> done some reading and it seems 7606S was supported first by SR train:
> http://www.cisco.com/en/US/docs/ios/12_2sr/release/notes/122SRrn.html#wp4344593
> I wonder if that will boot under SX (12.2(18)SXE6a).

Hi Mat,

When we switched over the 6509s to a 7609-S chassis, it booted and ran fine
under SXF15a.

After verifying the functionality, we moved to SRC2.

Hopefully this is of some help,
Rob

-- 
Rob Shakir                      <rjs at eng.gxn.net>
Network Development Engineer    GX Networks/Vialtus Solutions
ddi: +44208 587 6077            mob: +44797 155 4098
pgp: 0xc07e6deb                 nic-hdl: RJS-RIPE

This email is subject to: http//www.vialtus.com/disclaimer.html